How To Refinish Solid Wood Flooring?
Solid wood flooring, which is among the most popular flooring types, is made of a single piece of wood. Such floors are very durable (up to 100 years) and probably most of you have this type of floor at your house or flat. Its considerable advantage as compared to other flooring options is the fact that you can re-coat and refinish it multiple times, making it look new and very appealing again.
When you notice that a protective finish of your floor has worn off, you don’t need to replace it, just refinish it – it is much cheaper and doesn’t require that much time and preparations.
We would like to provide you with a short step-by-step instruction, which will help you do it on your own.
But even if you decide to use expert assistance and engage a professional, you will still have to pay less than if you wanted to have your floor replaced, so that’s an option that you obviously should take into account.
NOTE: At first, remember to precisely vacuum clean the floor and clean it with a damp mop. It may turn out that your floor doesn’t need to be refinished yet.
A step-by-step instruction on how to refinish solid hardwood floors:
Step 1 – Sanding
First, you should rent a floor sander. Carefully read its safety notice (remember that sanders are usually quite heavy). Then, move all your furniture out of the room and ensure that no obstacles will hinder the works. Fit heavy grit sandpaper sheet to the sander and start the sanding process in accordance with the direction of the grain.
As you’ve finished, do it once again, but this time use sandpaper with lighter grit. Don’t forget that you need to proceed in the direction of the wood grain.
Step 2 – Staining
Staining is optional. It is up to you to decide whether you want to stain your floor or leave its natural shade.
Vacuum clean the interior, removing the dust and all the remains left after the sanding. Conduct a test of the stain that you’ve selected on a small, hidden area of the floor to confirm that the shade really appeals to you. Then, stain the floor and wait some time to allow it to dry.
Step 3 – Finishing
Carefully apply a polyurethane finish to your floor, using a roller brush, and leave it for several hours until it’s dry. If you want a perfect finish effect, wait for ca. 4 or 5 hours until the floor is dry and then apply the next layer of finish, leaving it until it becomes perfectly dry.
You need to remember to comply with all the safety rules all the time: each time, read product labels, in particular when you’re using chemical substances. If possible, always test a given product first. Wear protective clothes and often air the room during the sanding process.
As we have already mentioned, solid hardwood floors are manufactured from 100% hardwood, so they last longer than other floors and you can sand, refinish or re-coat them a few times, making them look fresh again. Therefore, solid hardwood floors are more durable than other flooring solutions.
- How To Refinish Solid Wood Flooring?11/02/2015
- Choosing the best hardwood floor for your money10/11/2018
- 5 great ways to use reclaimed flooring08/20/2018
- Natural Stones of the World: The Complete Guide08/12/2019
- Should I get a Chevron Wood Floor? Is it worth it?04/17/2019
- The Differences Between Engineered Flooring and Laminate Flooring11/02/2015
- What Are Walnut Flooring Pros and Cons?07/16/2018
- How durable is walnut flooring?11/26/2018
- What to Consider Before purchasing New Wood Flooring?08/31/2018
- Top trending wood flooring in Los Angeles03/27/2019
- Red Oak vs White Oak Flooring04/10/2019
- Is Hardwood Floor Right for A Bathroom?07/12/2019