This series is a color body porcelain that is produced to emulate a Travertine. The unbelievable similarities between this product and actual limestone were made possible due to new, digital, inkjet technology. available in the sizes listed below, because this material is a porcelain product, minimal maintenance is required. Numerous patterns can be created with the available sizes. It is important to note that there is a slight difference in thickness between the 6”x36” and 12”x24” size. Piece to piece variation in shade or color are inherent in all fired clay products; therefore it is recommended to mix tiles from several boxes at a time during installation to achieve the best range of color. When installing rectangular tiles 15 inches or longer with a staggered joint, industry standard is that the offset should not exceed 33%.